工业皮带有工业传动带、汽车传动带和保送带三大类。前两种都属于传动带。传动带用于传送机械动力的胶带，包括平型传动胶带和三角传动胶带（V型胶带）。由橡胶和加强资料（如棉帆布、人造丝、合成纤维或钢丝等）构成。以多层挂胶帆布、合成纤维织物、帘线和钢丝等作抗拉层，覆合橡胶后经成型、硫化而制成。与齿轮传动、链条传动相比，胶带传动具有机构简单、噪声小和设备本钱低等优点，普遍用于各种的动力传动。机器上传动的环形带，套在两个皮带轮上，多用牛皮或线蕊橡胶制成，通称皮带。
Industrial belt includes industrial belt, automobile belt and conveyor belt. The first two belong to the transmission belt. The belt is used for conveying mechanical power, including flat belt and triangular belt (V belt). It consists of rubber and reinforcement materials such as cotton canvas, rayon, synthetic fibers or steel wires. The multi-layer hanging rubber canvas, synthetic fibre fabric, cord and steel wire are used as the tensile layer. After laminating rubber, they are formed and vulcanized. Compared with gear transmission and chain transmission, belt transmission has the advantages of simple mechanism, low noise and low equipment cost, and is widely used in various power transmission. Ring belt driven on the machine, sleeved on two pulleys, is made of cowhide or thread rubber, commonly known as belt.
工业皮带的贮存
Storage of industrial belts
1、储存时库房温度宜坚持在-15~40摄氏度之间相对湿度宜坚持在50%~80%之间。
1. Storage temperature should be between - 15 and 40 degrees Celsius and relative humidity should be between 50% and 80%.
2、在贮存和运输期间，应防止阳光直射或雨雪浸淋，坚持清洁，避免与酸碱油类及有机溶剂等影响橡胶质量的物质接触。
2. During storage and transportation, direct sunshine or rain and snow should be prevented, cleanliness should be maintained, and contact with substances such as acid-base oils and organic solvents that affect rubber quality should be avoided.
3、贮存期间应防止使皮带接受过大的重量而变形，避免机械损伤，不得过于弯曲和挤压。
3. During storage, the belt should be prevented from deforming due to accepting large weight, avoiding mechanical damage, and should not be too bent or extruded.
工业皮带的运用常识
Common sense of industrial belt application
1、皮带的运用温度范围为:-40°-120°C。
1. The temperature range of belt is - 40 120 C.
2、请勿粘染油脂或其他化学品于皮带上。
2. Do not stick grease or other chemicals to the belt.
3、皮带装置时工具或外力切勿直接施力于皮带上。
3. Do not apply the tool or external force directly to the belt when the belt is installed.
4、皮带和带轮应坚持干净，不得沾有油和水。
4. Belts and pulleys should be kept clean and not contaminated with oil and water.
皮带装置时，应检查传动系统，传动轮和传动轴能否垂直，传动轴能否平行，传动轮能否在同一平面，发现问题，及时校正。
When the belt device is used, the transmission system, whether the transmission wheel and the transmission shaft are vertical, whether the transmission shaft is parallel, whether the transmission wheel is on the same plane, whether the problem is found, and corrected in time should be checked first.
联系微信