大倾角皮带保送机是我公司主营的一款产品,依据多年的运用和销售,在这里对它的操作总结以下几点,
The belt conveyor with large inclination angle is a main product of our company. Based on years of operation and sales, the following points are summarized here for its operation.
与大家共同讨论:
Discuss with you:
1.、运用前应该先检查各运转局部、胶带搭扣和承载安装能否正常,防护设备能否齐全。胶带的涨紧度应该在启动前调解到契合的程度。
1. Before use, it is necessary to check whether the running parts, tape buckles, loading and installation are normal, and whether the protective equipment is complete. The tape tension should be adjusted to fit before starting.
2、大倾角皮带保送机应空载启动。等运转正常前方可入料。制止先入料后开车。
2. The belt conveyor with large inclination should start without load. Feeding can be done before normal operation. Stop feeding before driving.
3、产品应按规则的安顿要领安顿在固定的底子上,移动式保送机正式运转前应将轮子用三角木楔住或用制动器刹住,以免工作中发作走动。
3. The product should be installed on a fixed base according to the main points of the rules. The wheels of the movable escort machine should be wedged with triangle wood or braked with brakes before it is officially operated, so as to avoid moving in the work.
4、有多台保送机平行作业时,机与机之间,机与墙之间应有一米的通道。
4. There should be a one-meter passageway between the machine and the machine, and between the machine and the wall when there are several escorts working in parallel.
5、保送带上制止行人或乘人,皮带打滑时严禁用手去拉动皮带,以免发作变乱。
5. Stop pedestrians or passengers on the escort belt. When the belt slips, it is strictly forbidden to pull the belt by hand so as to avoid chaos.
6、停车前必需先中止入料,等皮带上存料都卸下来前方可停车。
6. Stop feeding before stopping. Stop before unloading all the material on the belt.
7、工作环境及被送物料温度不得高于五零℃和低于-一零℃,不得保送具有酸碱性油类和有机溶剂成份的物料。
7. The working environment and the temperature of the material to be delivered shall not be higher than 50 or lower than - 10 C. The material with acid and alkaline oils and organic solvents shall not be escorted.
8、移动式保送机电缆不要乱拉和拖动,电动机密牢靠接地。
8. Don't pull and drag the cable of the movable escort. The motor is firmly grounded.
9、有数台保送机串联运转时,应从卸料端开端,依次启动,全部正常运转后,方可入料。
9. When there are several delivery machines running in series, they should start from the unloading end and start in turn. Only when all of them are in normal operation can they be fed.
10、运转中呈现胶带跑偏征象时,应停车检查调整,不得勉强运用,以免磨损边沿和增加负荷
10. When running with the sign of tape deviation, stop and check and adjust, and do not use it reluctantly, so as to avoid wearing edges and increasing load.
If you need large inclined conveyor belt, you can click on the official website for consultation: https://www.huafengxiangsu.com