The conveyor belt of vegetable cutter has the functions of cutting resistance, sanitation and durability, acid and alkali resistance, and also has the advantages of no slag falling, wear resistance and cutting resistance. It is more suitable for donkey hide gelatin, pasta and other food processing industries.

切菜机输送带常应用于蔬菜、药材、瓜果、海产品等的切丝、切块、切片、切丁、切条等输送。下面君泰橡塑具体介绍下切菜机输送带磨损变薄如何维护。

The conveyor belt of vegetable cutter is often used to cut vegetables, medicinal materials, fruits, seafood, etc. The following Juntai rubber and plastic specifically introduces how to maintain the wear and thinning of the conveyor belt of the vegetable cutter.

1、进料和切菜机输送带运转方向相同。在进料过程中，物料以简直与保送带相同的速度挪动。

1. Feeding and cutting machine conveyor belt running in the same direction. In the feeding process, the material moves at almost the same speed as the belt.

切菜机输送带磨损变薄如何维护

How to maintain the conveyor belt of vegetable cutter

2、切菜机输送带上物料的等效自在落体高度小于1米，使保送带上的冲击力尽可能小。

2. The equivalent free falling height of the material on the conveyor belt of the vegetable cutter is less than 1m, so that the impact force on the conveyor belt is as small as possible.

3、给料斜槽设有带式筛，使细料先落在切菜机输送带上，为大料提供缓冲。

3. The feeding chute is equipped with belt screen, which makes the fine material fall on the conveyor belt of the vegetable cutter first to provide buffer for the large material.

4、设计合理的溜槽和导向溜槽，使物料连续落在切菜机输送带中部。

4. Reasonable chute and guide chute are designed to make the material continuously fall in the middle of the conveyor belt of the vegetable cutter.

5、导向槽的挡板宽度沿保送带方向越来越窄。此外，导槽应延伸到物料的速度，以到达皮带的速度。

5. The baffle width of the guide groove becomes narrower and narrower along the direction of the walk belt. In addition, the guide groove should extend to the speed of the material to reach the speed of the belt.

6、进料段应坚持程度或倾斜不超越8度，进料段应装置缓冲辊或对槽辊加密。另外，溜槽和导向槽应固定结实，使其正确地靠在保送带上，导向底部不能离切菜机输送带太近。

6. The feeding section shall not be inclined more than 8 degrees, and buffer roll or groove roll shall be installed in the feeding section. In addition, the chute and guide groove should be fixed firmly, so that they are right against the conveyor belt, and the guide bottom should not be too close to the conveyor belt of the vegetable cutter.