大倾角保送带运用一段时间之后,由于其表面会与货物产生摩擦,摩擦之后会产生一定的污垢,进而影响保送带盖的工作效率,呈现这种情况就需求对保送带中止清洗:
After a period of time, because of the friction between the surface and the cargo, a certain amount of dirt will be produced after the friction, which will affect the efficiency of the cover. This situation requires that the cleaning of the belt be discontinued:
1. 在清洗大倾角保送带之前应将蒸汽阀关掉,依据张紧装置的位置来对压力中止调理;
1. Turn off the steam valve before cleaning the steep inclined belt, and adjust the pressure stop according to the position of the tensioner.
2. 关于机电设备,要用塑料将其包起来;
2. As for electromechanical equipment, it should be wrapped in plastic.
3. 把大倾角保送带衔接起来,把清洗剂与220V交流电衔接起来;
3. Connect the high inclination belt and the cleaning agent with 220V AC.
4. 将大倾角保送带浸湿,这样做能够使保送带更好的吸收清洗溶液,清洗的更干净;
4. Wet the high inclined belt, which can make the belt absorb the cleaning solution better and clean more.
5. 将水和清稀溶液10:1的比例中止混合,然后搅拌均匀;
5. Stop mixing at the ratio of 10:1 of water and dilute solution, and stir evenly.
6. 用喷枪把清洗溶液均匀的喷洒在保送带上,要留意保送带的加强边,不能用力过猛,防止损伤保送带,冲枪尽量不要一次性扫过,也不要对保送带中止重复冲洗。
6. Spray the cleaning solution evenly on the delivery belt with a spray gun. Pay attention to the reinforcement edge of the delivery belt. Don't use too much force to prevent damage to the delivery belt. The spray gun should not sweep the delivery belt at one time or stop the repeated washing of the delivery belt.
7. 喷洒完清洗溶液以后就可以运用清水冲洗,一定要认真的冲洗干净,然后再中止烘干。
7. After spraying the cleaning solution, you can use clean water to wash. You must wash it carefully and then stop drying.
The excellent content of this article is compiled by the big inclined conveyor belt. Our company insists on the win-win concept of honesty and cooperation to provide you with perfect service. Welcome to https://www.huafengxiangsu.com.