In the process of using conveyor belt, there will inevitably be some scratches and damage. In the process of maintenance, patches are needed. Belt repair tape is a common material in the process of cold vulcanization bonding. Belt conveyor manufacturers on the following detailed understanding of belt conveyor repair belt performance characteristics.

　　输送带修复文章文章通常分为正常维修和加固维修,普通修理只条拉伸橡胶层的耐磨层,使用胶水固化胶粘剂一半硫化活性层,主要用于带表面的橡胶磨损缺陷,保护胶带芯层织物层或钢丝绳从腐蚀和磨损;修复和加固杆内部橡胶层和一层织物加强层,纤维加强层的存在极大地提高结构强度的修复,对磁带穿透伤,行穿,眼泪,和密封带冷接头具有良好的修复效果,在一定程度上恢复结构强度,胶带可以满足正常工作的需要使用。输送带修复文章必须注意什么样的伤害,橡胶使用的胶带往往是过度磨损甚经常刮刮破,选择相应的修复的文章,文章中不得使用普通修复修复破损的磁带,和加固修复修复胶带表面的橡胶磨耗是完全不必要的,它实际上可能增加需要磨削深度,改善施工工作。

　　Conveyor belt repair articles are usually divided into normal maintenance and reinforcement maintenance, ordinary repair only stretching rubber layer wear-resistant layer, using glue curing adhesive half vulcanized active layer, mainly used for rubber wear defects on the surface of belt, protecting the fabric layer or wire rope from corrosion and wear; repair and reinforcement rod internal rubber layer and wire rope. A layer of fabric reinforcement layer, the existence of fiber reinforcement layer greatly improves the repair of structural strength. It has a good repair effect on tape penetration, penetration, tear, and cold joint of sealing tape. To a certain extent, it restores structural strength. The tape can meet the needs of normal work. What kind of damage should be paid attention to when repairing conveyor belts? The rubber belts used are often over-worn or even scratched. Selecting the corresponding repairing articles, it is totally unnecessary not to use ordinary repairing tapes to repair damaged ones, and to reinforce the rubber wear of repairing the surface of the belt. In fact, it may increase the demand. It is necessary to grind depth and improve construction work.

　　条输送带修复后会有一层绿色一半硫化活性层,本文硫化层修复表面涂刷胶粘剂,涂刷后冷硫化胶TX,一半的硫化层将迅速反应在室温硫化胶在一起,形成类似于热硫化粘结效果,与热硫化粘接强度能达到相应的水平。半硫化AS活性层的存在，使冷胶修复更有效、更容易操作、效果更好。

　　After repairing conveyor belt, there will be a green and semi-vulcanized active layer. In this paper, the vulcanized layer is repaired by brushing adhesives. After brushing, the cold vulcanizate TX, and half of the vulcanized layer will react rapidly with the room temperature vulcanizate to form a similar thermal vulcanization bonding effect, which can reach the corresponding level with the thermal vulcanization bonding strength. The presence of semi-vulcanized AS active layer makes cold rubber repair more effective, easier to operate and better.

　　以上是输送带性能特点的修复带，希望对您有所帮助。如果输送带在使用中有小的损坏，直接更换会增加生产成本的投入，所以使用修复带进行修复是合适的。有关输送带的更多信息，请访问我们的网站。

　　Above is the repair belt of conveyor belt performance characteristics, hope to help you. If the conveyor belt is damaged slightly in use, direct replacement will increase the cost of production, so it is most appropriate to use repair belt to repair. For more information about conveyor belts, please visit our website.