1、装运时，进料器应对称。给料机是提高山东输送带运输和交付过程中平稳,不要太多支线,将导致材料类型管或充满,然后在机械和设备,不仅危害到所有机械和设备正常运行,环境污染周围的自然环境,造成不特定操作的设备。

1. The feeder shall be symmetrical during shipment. The feeder is used to improve the stability of Shandong conveyor belt during transportation and delivery. There should not be too many branch lines, which will lead to material type pipe or filling, and then in the machinery and equipment, it will not only endanger the normal operation of all machinery and equipment, but also pollute the surrounding natural environment, resulting in equipment without specific operation.

2、末端的螺旋装配线须根据机器和设备的具体操作条件进行调整。张力装置应该调整的时间,保持山东输送带应用于正常工作。

2. The spiral assembly line at the end must be adjusted according to the specific operating conditions of the machine and equipment. The tensioning device should adjust the time to keep the Shandong conveyor belt applied to normal operation.

3、输送带皮带为商品提供了很多方便性，这也体现了我们在更自然的环境下对信息内容传播的要求。在山东输送带操作中，随时做好输送带相关的维护保养保养，是很有必要的。

3. Conveyor belts provide a lot of convenience for commodities, which also reflects our requirements for information content dissemination in a more natural environment. During the operation of conveyor belt in Shandong, it is necessary to maintain the conveyor belt at any time.

4、输送带皮带运转速度普通不宜大于2、5m/s，块度大，磨损性大的物料和运用固定梨的卸料安装应尽量采用低速。

4. The running speed of the conveyor belt should not be greater than 2 or 5m/s generally. Low speed should be used as far as possible for the unloading and installation of materials with large lumpiness and wear and the use of fixed pears.

5、滚筒保送机的传动滚筒直径与保送带布层的关系、传动滚筒、改向滚筒的配套以及对托辊槽角的请求应依据运输机的设计规则,合理选取。

5. The relationship between the diameter of the driving drum of the drum escort machine and the cloth layer of the escort belt, the matching of the driving drum and the reversing drum, and the requirements for the idler groove angle shall be reasonably selected according to the design rules of the conveyor.

6、给料方向应顺保送带的运转方向，为减小物料下落时对保送带的冲击应采溜槽，减小物料落差间隔；保送带受料段，应缩短托辊间距和采用缓冲托辊为漏料，保送带顺应采用柔软适度的挡料板，以免档料板过硬，刮破保送带的带面。

6. The feeding direction shall be in line with the running direction of the walking belt. In order to reduce the impact on the walking belt when the material falls, a chute shall be used to reduce the drop interval of the material; In the material receiving section of the escort belt, the idler spacing shall be shortened and the buffer idler shall be used as the material leakage. The escort belt shall comply with the requirements of using a soft and appropriate baffle plate to prevent the baffle plate from being too hard and scratching the belt surface of the escort belt.

7、保送机在运用时，针对托辊短少，应及时添加及修好，托辊被物料掩盖，形成回转不灵，避免漏料卡于滚筒与胶带之间，留意保送带活动局部的光滑，但不得油污保送带。

7. During the operation of the escort machine, due to the shortage of idlers, they should be added and repaired in time. The idlers are covered by materials, resulting in poor rotation, so as to avoid material leakage stuck between the drum and the belt. Pay attention to the smoothness of the moving parts of the escort belt, but do not oil the escort belt.

8、防止山东输送带皮带遭受机架，支柱或块状物料的阻滞，避免碰破扯裂，发现保送带部分破损时，应用人造棉及时修补，以免扩展。

8. Prevent the Shandong conveyor belt from being blocked by the frame, support or block materials, and avoid breaking and tearing. When finding that the part of the conveyor belt is damaged, it should be repaired with artificial cotton in time to avoid expansion.

以上就是今天所要讲解的内容了，相信大家在看完本文的描述之后，能够对该产品有一定的认识和了解，希望以上内容能帮助到你。另外，若你想要了解更多相关资讯，可以多多关注我们的网站动态www.huafengxiangsu.com。

The above is the content to be explained today. I believe that after reading the description of this article, you can have a certain understanding of the product. I hope the above content can help you. In addition, if you want to learn more about the relevant information, you can pay more attention to our website, WWW, huafengxiangsu, com.