Ring belts (ring belts) are made into connectionless ring belts (ring belts) in the process of consumption. Their characteristics are that there are no joints in the core of belts, and their service life is not affected by the early damage of the joints. The surface of the belts is flat and the tension is average, so the belt runs smoothly and the elongation is small.

环型保送带，环状保送带： 环形保送带系指消费过程已将保送带制成无接头的环形保送带，其带芯接头处强力可到达胶带本体强力的90%，胶带外表无明显接头缺陷，因而，胶带运输均衡，运用伸长小。环形保送带带芯用全棉或维棉交错帆布制成，普通2-6层或用NN-200型尼龙帆布（或聚酯 帆布）作强力层。

Ring-type belts: Ring-type belts refer to the ring-type belts that have been made into connectionless belts in the consumption process. The strength of the core joints can reach 90% of the strength of the belt body, and there is no obvious joint defect on the surface of the belt. Therefore, the belt transportation is balanced and the use elongation is small. Ring belts with cores are made of high quality cotton or vinylon interlaced canvas. Normal 2-6 layers or NN-200 nylon canvas (or polyester canvas) are used as strong layers.

环形保送带长度及极限偏向： 环形保送带长度m 极限偏向mm 长度小于15 ± 50 长度15-20 ± 75 长度大于20 带长的 ± 0.5% 本公司可依据客户需求消费适宜长度、宽度和厚度的普通型、耐热型（≤120oC）、 耐寒型（不低于-40oC）、耐酸碱型、耐高温型（不高于150oC）及卫生型环形保送带。

The length and ultimate deviation of the circular delivery belt: the length of the circular delivery belt m ultimate deviation mm length less than 15 + 50 length 15 - 20 + 75 length greater than 20 belt length (+0.5%) The company can consume the suitable length, width and thickness of the general type, heat-resistant type (<120oC), cold-resistant type (not less than - 40oC), acid and alkali-resistant type according to customer demand. Type A, high temperature resistant type (not higher than 150oC) and sanitary type circular delivery belt.

环形保送带在运用过程中应留意以下事项：

The following points should be noted in the operation of the circular belt:

防止托辊被被物料掩盖，形成回转不灵，避免漏料卡于滚筒与胶带之间 ，留意活动局部的光滑，但不得油污保送带。

Prevent the idler from being covered up by the material, and form an ineffective rotation. Avoid leakage between the roller and the tape. Pay attention to the smoothness of the moving part, but not the oil-stained conveyor belt.

力图防止带负荷启动。

Strive to prevent start-up with load.

胶带发作跑偏，应及时采取措施纠正。

In case of tape deviation, timely measures should be taken to correct it.

发现胶带部分损伤应及时修补，以免扩展。

It is found that some damage of tape should be repaired in time to avoid expansion.

防止胶带遭受机架、支柱或块状物料的阻滞，避免碰破扯裂。

Prevent tape from being blocked by rack, prop or block material and avoid breaking and tearing.

以上就是今天小编为大家介绍关于切菜机输送带的相关的资讯，您可以及时的关注我们的网址：https://www.huafengxiangsu.com查询了解更多的详情咨询,我们会有更多的精彩内容为您呈现.

Above is the information about the conveyor belt of the vegetable cutter introduced in today's edition. You can pay attention to our website in time: https://www.huafengxiangsu.com for more details and consultation. We will have more wonderful content for you.