随着东北老工业基振兴发展，输送带已经被广泛应用在我国各个行业中，
大倾角输送带厂家就带领大家学习一下如何正确的安装输送带，详细过程如下：
With the revitalization and development of the old industrial base in Northeast China, conveyor belts have been widely used in various industries in China. The manufacturers of large inclined conveyor belts will lead you to learn how to install conveyor belts correctly. The detailed process is as follows:
1、在输送带卷取铁芯上穿上转动灵活的轴，并将带卷架好，上架前注意上、下盖胶的方向不要架反。
1. Put a flexible rotating shaft on the core of the conveyor belt coiling, and frame the belt coiling well. Pay attention to the direction of the upper and lower cover glue before mounting.
2、在不宜上架的工作场所可以把输送带卷导开，并使折叠处输送带具有足够大曲率半径，防止损伤输送带，折叠处禁止在输送带上放置重物。
2. Conveyor belts can be rolled away in workplaces where they are not suitable for shelving. Conveyor belts at folding places can have sufficient radius of curvature to prevent damage to conveyor belts. Heavy objects are forbidden to be placed on conveyor belts at folding places.
3、如果是更换输送带，可将新带与旧带连在一起，卸带与安装新输送带同时进行。
3. If the conveyor belt is replaced, the new belt can be connected with the old belt, and the unloading and installation of the new belt can be carried out simultaneously.
4、对于水平运转的输送机，可在任何一点切断旧输送机，倾斜方向运转的输送机，则需选好切断点，防止因自重引起下滑而失控。
4. For the conveyor running horizontally, the old conveyor can be cut off at any point. For the conveyor running in an inclined direction, the cut-off point should be selected to prevent the loss of control caused by self-weight.
5、在输送机上将新带的位置放正后，用夹具将胶带的一端固定好，然后绕过辊与带轮的绳索相连，通过牵引装置将输送带平衡的架到输送机上，牵引时，要防止输送带与机架相互挤压。
5. After positioning the new belt on the conveyor, fix one end of the belt with a fixture, then connect the belt with the rope of the pulley by bypassing the roll. The conveyor belt is balanced by a traction device. When pulling, the conveyor belt and the frame should be prevented from extruding each other.
6、用夹具将输送带的一端固定在输送机架上，另一端通过滑轮将另一端拉紧，直到输送带在返回托辊上无明显下垂。
6. Fix one end of the conveyor belt on the conveyor frame with fixture, and the other end is tightened by pulley until the conveyor belt does not sag obviously on the return roller.
7、将张紧装置固定离起点100~150mm。
7. Fixed the tensioner 100-150 mm away from the starting point.
8、输送带要选择正规厂家，我们沈桥提供上门安装售后服务。
8. Conveyor belts should be manufactured by regular manufacturers. We provide door-to-door installation and after-sales service in Shenqiao.
Above is the correct installation process of the conveyor belt introduced by the conveyor belt manufacturer for you. I believe you will learn from it. If you have any questions, you can click on our website to consult: https://www.huafengxiangsu.com.
联系微信