大家都知道，流水线离不开输送带的传送，能够的完成生产，节省不少人力成本。但是如果使用的时候不注意也会出现横断的现象，这是哪些因素导致的呢？

　　As we all know, the assembly line is inseparable from the transmission of the conveyor belt, which can efficiently complete production and save a lot of labor costs. But if you do not pay attention to the use of transverse phenomenon, which factors lead to it?

　　遇到连续横向现象，先停机检查，经过仔细检查，可以很明显地发现这种现象的原因。输送机可能有个别突出的滚筒槽角，导致输送带线断裂，从而造成横断的结果。主动电动滚筒、张力电动滚筒和从动电动滚筒上面覆盖了一些不正常的粘结物，使输送带充满了各种大小的疙瘩，很容易使输送带出现积横断，避免这种现象的发生经常是定期清洗输送带的异物。

　　In case of continuous transverse phenomenon, stop the machine for inspection first. After careful examination, it is obvious that the cause of this phenomenon can be found. Conveyor may have individual prominent drum groove Angle, resulting in conveyor belt line fracture, resulting in transverse results. The active electric roller, tension electric roller and driven electric roller are covered with some abnormal adhesives, which make the conveyor belt full of bumps of various sizes. It is easy to make the conveyor belt cross section in the whole area. To avoid this phenomenon, foreign bodies in the conveyor belt are often cleaned regularly.

　　山东流水线输送带长期使用后会出现各种问题。为了避免出现问题，应提前进行预防。那么，如何防止输送带损坏呢?

　　The conveyor belt will have various problems after long-term use. In order to avoid problems, prevention should be carried out in advance. So, how to prevent the conveyor belt damage?

　　选择资质完善、体系完善、信誉良好的输送带厂家供货，流水线输送带本身质量带来的潜在风险。胶带受料及转载点漏斗的设计应合理。既避免了形成较大的落差，又改变了货物的流向，使物品流向和皮带机的运输一致。

　　Choose the conveyor belt manufacturers with perfect qualification, perfect system and good reputation to supply, eliminate the potential risks brought by the quality of assembly line conveyor belt itself. The design of material receiving and transfer point funnel should be reasonable. Not only to avoid the formation of a large drop, but also changed the flow of goods, so that the flow of goods and belt conveyor transport consistent.

　　禁止用输送带运输大型物品和铁质物品。对于粒径符合要求的材料，还应保证温度，以免造成皮带表面覆盖胶的损坏、剥离和脱落。从运输系统源头控制铁器及坚硬长条片矸的进入，并沿运输系统设置必要的破碎机和除铁机。

　　It is forbidden to transport large items and iron items by conveyor belt. For the particle size meets the requirements of the material, but also to ensure the temperature, so as not to cause damage to the belt surface covering glue, peel and fall off. Control the entry of iron and hard strip gangue from the source of the transportation system, and install the necessary crusher and iron removal machine along the transportation system.

　　山东流水线输送带的存放应避免日晒雨淋。对于长期存放的输送带，须进行纵向拉伸强度试验。对于输送带导槽、清扫器等附件，应认真进行日常维护，间隙增大或损坏应及时修理或更换。

　　The storage of conveyor belt should avoid sun and rain. For long - term storage conveyor belts, longitudinal tensile strength test should be carried out. For the conveyor belt guide groove, sweeper and other accessories, daily maintenance should be carried out carefully, and the gap increase or damage should be repaired or replaced in time.

　　另外，滚筒应定期检查，尽早发现运行中的裂纹、局部过度磨损等隐患。以上便是问题的讲解内容了，如果您还有其他问题，那就来此www.huafengxiangsu.com进行咨询了解吧。

　　Additional, drum should check regularly, discover as soon as possible in running crack, local excessive wear and tear wait for hidden trouble. The above is the explanation of the problem content, if you have other questions, then go to www.huafengxiangsu.com for consultation.