PVC输送带具有强度高、质量轻、耐磨损、多彩美观、无味、抗静电、拉伸小、使用寿命长和阻力小等优点。那么PVC输送带和PVK输送带的区别是怎样的呢？

PVC conveyor belt has the advantages of high strength, light weight, wear resistance, colorful and beautiful, non-toxic and tasteless, anti-static, small tension, long service life and low resistance. What is the difference between PVC conveyor belt and PVK conveyor belt?

材质之间的区别：

Differences between materials:

PVC输送带：表面是由聚录乙烯(PVC)，其形式为聚酯纤维布+PVC塑料成型。

PVC conveyor belt: the surface is made of polyvinylidene (PVC) in the form of polyester fiber cloth +pvc plastic.

PVK输送带：是采用整体编织物制成的输送带，然后浸透PVK防火耐冲击涂料，不存在分层的隐患。

PVK conveyor belt: it is a conveyor belt made of integral woven fabric, and then soaked with PVK fire-proof and impact resistant coating. There is no hidden danger of layering.

特性的区别：

Differences in characteristics:

PVC输送带：高强度、轻质量、多彩美观、抗静电、拉伸小、使用寿命长和阻力小等特性。

PVC conveyor belt: high strength, light weight, colorful and beautiful, antistatic, small stretching, long service life and low resistance.

PVK输送带：具有防滑、耐切割用、耐磨、耐冲压耐脏、耐阴燃、防潮湿、抗静电、高抗拉强度、防腐蚀、低延展力、胶合力强、无脱落等特性。

PVK conveyor belt: it has the characteristics of skid resistance, cutting resistance, wear resistance, stamping resistance, dirt resistance, smoldering resistance, moisture resistance, antistatic, high tensile strength, corrosion resistance, low ductility, strong gluing force, no falling off, etc.

外观的区别：

Appearance difference:

PVC输送带：可分为平面PVC输送带和花纹输送带。

PVC conveyor belt: it can be divided into flat PVC conveyor belt and figured conveyor belt.

PVK输送带：两面都是粗糙面。

PVK conveyor belt: both sides are rough.

加工的区别：

Differences in processing:

PVC输送带：PVC皮带表面可以添加各种花纹，可以添加PVC导条，挡板，裙边，封边，打孔，红胶海编等。

PVC conveyor belt: various patterns can be added to the surface of PVC belt, including PVC guide strip, baffle, skirt, edge banding, punching, red glue sea weaving, etc.

PVK输送带：目前特殊加工的比较少。

PVK conveyor belt: at present, there are few special processing.

此外山东输送带厂家提醒，使用PVC输送带时的注意事项不少，比如说：

In addition, there are many precautions when using PVC conveyor belt, such as:

输送带在运输和贮存中，应保持清洁避免阳光直射或雨雪浸淋,防止与酸、碱、油类、有机溶剂等物质接触，并距离发热装置一米以外。发现胶带局部损伤应及时修补，以免扩大;贮存时仓库温度宜保持在18-40℃之间，相对湿度宜保持在50-80%之间。避免胶带遭受机架、支柱或块状物料的阻滞，防止碰破扯裂输送带。

During transportation and storage, the conveyor belt shall be kept clean from direct sunlight or rain and snow, and shall not contact with acids, alkalis, oils, organic solvents and other substances, and shall be more than one meter away from the heating device. In case of local damage of the tape, it shall be repaired in time to avoid expansion; During storage, the warehouse temperature should be kept between 18-40 ℃ and the relative humidity should be kept between 50-80%. Prevent the belt from being blocked by the frame, support or block materials, and prevent the belt from breaking and tearing.

PVC输送带的类型、结构、层数应根据使用条件合理选用;避免托辊被物料覆盖造成回转不灵，防止漏料卡料在滚筒与胶带之间，注意活动部分的润滑，但不得油污PVC输送带。等等。

The type, structure and number of layers of PVC conveyor belt shall be reasonably selected according to the service conditions; The idlers shall not be covered by materials, which may cause poor rotation, prevent material leakage and jamming between the roller and the belt, and pay attention to the lubrication of the moving parts, but shall not pollute the PVC conveyor belt. wait.

以上就是关于PVC输送带和PVK输送带的一些区别，希望对大家有所帮助，相信大家对PVC输送带和PVK输送带也有了一定的了解了，希望能对大家有所帮助。如果还想要了解更多关于输送带的相关知识，记得关注我们网站www.huafengxiangsu.com！

The above is about the differences between PVC conveyor belt and PVK conveyor belt. I hope it will help you. I believe you have a certain understanding of PVC conveyor belt and PVK conveyor belt. I hope it can help you. If you still want to know more about conveyor belts, remember to follow our website www.huafengxiangsu com！