切菜机输送带使用一段时间后会出现经常性故障，这是一件让人非常苦恼的事情，那么切菜机输送带经常性故障怎么解决呢？

　　After using for a period of time, the conveyor belt of the vegetable cutter will often fail. This is a very upsetting thing. Then how to solve the frequent failures of the conveyor belt of the vegetable cutter?

　　在大多数情况下，输送带的故障大多是由于输送带本身的质量问题，但不能排除是使用不当造成的。一般来说，更常见的输送带故障是跑偏和撕裂。解决方法建议：

　　In most cases, the failure of the conveyor belt is mostly due to the quality of the conveyor belt itself, but can not be ruled out is caused by improper use. Generally speaking, the most common conveyor belt faults are running deviation and tearing. Solution suggestions:

　　设计制造防跑偏托辊装置。输送带跑偏是造成输送带刷毛的主要原因。因此，在原有框架的基础上，每10个框架安装2个防偏装置，自动修正输送带跑偏。该方法简单易行，具有良好的防跑偏效果。

　　Design and manufacture anti-deviation roller device. Conveyor belt running deviation is the main cause of conveyor belt brushing. Therefore, on the basis of the original frame, 2 anti-deviation devices are installed for every 10 frames to automatically correct the deviation of the conveyor belt. The method is simple and feasible, and has good anti-deviation effect.

　　修改托辊的原始形状。现在使用的所有辊子在端面和辊子表面之间都具有直角。当托辊转动时锋利的直角边缘不灵活时，由于输送带上的货物，输送带受到向下的弯曲力，托辊的边缘就像刀嵌入输送带，传送带纵向撕裂。

　　Modify the original shape of the idler. All rollers in use today have a right Angle between the end face and the roll surface. When the sharp right Angle edge is not flexible when the roller rotates, because of the goods on the conveyor belt, the conveyor belt is subjected to downward bending force, the edge of the roller is like a knife embedded in the conveyor belt, and the conveyor belt is torn longitudinally.

　　弧形托辊的设计可以从根本上解决这个问题，替代原来的传统工艺。即使输送带因两组托辊之间负荷较大而发生弯曲，也不会损坏输送带，从根本上解决了输送带纵向撕裂的问题。

　　The design of arc idler can fundamentally solve this problem and replace the original traditional technology. Even if the conveyor belt is bent due to a large load between two sets of rollers, it will not damage the conveyor belt, which fundamentally solves the problem of longitudinal tearing of the conveyor belt.

　　我们要注意切菜机输送带的使用和保养，选择适合我们实际使用的输送带产品。当输送带经常损坏时，我们也可以根据上面提到的两种方法进行调整，以保证输送带的使用能给我们带来想要的效果。还有不懂的地方可来http://www.huafengxiangsu.com网站咨询！

　　We should pay attention to the use and maintenance of the conveyor belt of the vegetable cutter, and choose the conveyor belt products suitable for our actual use. When the conveyor belt is often damaged, we can also adjust according to the two methods mentioned above to ensure that the use of the conveyor belt can bring us the desired effect. And don't understand the place can seek advice to http://www.huafengxiangsu.com!