We believe that the purpose of buying conveyor belt belt is the same, that is, hope to improve work efficiency through it, so that the production profit increase. So how to improve the efficiency of shandong conveyor belt belt? In addition to choosing good quality conveyor belt belt, we should also pay attention to the following points.

　　输送带在运输过程中需要严格控制。输送物料时，如果要输送的物料过多，就会出现各种问题，比如输送带断裂或划伤等。到位，不合格的情况会出现各种问题。因此，需要严格控制运输量。

　　Conveyor belts need to be strictly controlled during transportation. When conveying materials, if the material to be transported is too much, there will be various problems, such as conveyor belt fracture or scratch. In place, unqualified situations will appear all kinds of problems. Therefore, strict control of traffic volume is needed.

　　严格控制输送带尺寸，避免出现问题。山东输送带皮带的宽度取决于具体的工作环境来确定具体的规格。一般我们可以使用各种规格的输送带产品。输送带根据物料输送和运输条件确定。端口太多肯定会断裂，影响输送带的正常使用。

　　Strictly control conveyor belt size to avoid problems. Shandong conveyor belt belt width depends on the specific working environment to determine the specific specifications. Generally we can use various specifications of conveyor belt products. The conveyor belt is determined according to the material conveying and transportation conditions. Too many ports will definitely fracture, affecting the normal use of the conveyor belt.

　　输送中使用时，如缺少托辊，应及时补充修理；托辊被物料覆盖，会造成转动无效，防止托辊与皮带之间漏料，注意润滑输送带的运动部件，但输送带上不能有油污。

　　When used in transportation, such as the lack of roller, should be timely supplemented repair; The roller is covered by material, which will cause invalid rotation. To prevent material leakage between the roller and the belt, pay attention to lubricating the moving parts of the conveyor belt, but there can be no oil pollution on the conveyor belt.

　　合理使用输送带会好很多。根据运输情况，合理使用输送带，不得超载，使托辊和输送带更好，避免各种跑偏等问题，保证正常运输。我们控制这些物料的输送节奏，不能快也不能慢，以免突然出现各种问题和输送带严重磨损。装卸时，应妥善保养输送带，以充分利用。

　　The proper use of conveyor belts would be much better. According to the transportation situation, the reasonable use of conveyor belt, not overload, so that the idler and conveyor belt better, avoid all kinds of deviation and other problems, to ensure normal transportation. We control the conveying rhythm of these materials, neither fast nor slow, in order to avoid sudden problems and serious wear of the conveyor belt. During loading and unloading, the conveyor belt should be properly maintained to make full use of it.

　　进料方向应沿输送带运行方向。为减少物料对输送带的影响，应采用溜槽，减小物料的间隙距离；对于输送带的物料部分，应缩短托辊、缓冲托辊之间的距离，用于泄漏和输送。皮带采用柔软适中的挡板，避免刮伤输送带表面，以免影响齿板质量。

　　Feeding direction should be along the conveyor belt running direction. In order to reduce the impact of materials on the conveyor belt, the chute should be used to reduce the clearance distance of materials; For the material part of the conveyor belt, the distance between rollers and buffer rollers should be shortened for leakage and transportation. The belt adopts soft baffle to avoid scratching the surface of the conveyor belt, so as not to affect the quality of the tooth plate.

　　上述就是山东输送带皮带的工作效率如何提高问题的一些介绍，相信对大家应该会有所帮助。只有平时做好维护和保养，输送带才能好好的正常运转工作。更多内容就来网站http://www.huafengxiangsu.com咨询吧！

　　The above is how to improve the efficiency of shandong conveyor belt belt some introduction, I believe that you should be helpful. Only do good maintenance and maintenance at ordinary times, the conveyor belt can work properly. More content to http://www.huafengxiangsu.com consultation!