When the conveyor belt runs away, the diffusion is caused by the height change of the two sides when the conveyor belt runs. When the other side is lower, the material scatters from the lower side. The treatment method is to adjust the deviation of conveyor belt. When the radius of curvature of concave section is small, the conveyor belt will be in suspension state.

　　由于输送带已离开槽辊组，一般槽角变小，使局部物料分散。为了缩短尾车，在移动式机械装载机和堆取料机上，将此处的凹段设计为无弧过渡段。

　　Because the conveyor belt has left the groove roll group, the general groove angle becomes smaller and the local material is dispersed. In order to shorten the tail car, the concave section is designed as an arcless transition section on the mobile mechanical loader and stacker-reclaimer.

　　导槽处的钢板设计远离输送带，且橡胶裙板较长，使物料冲出导槽，注意定期保养。选购输送带时要准确描述具体的物料名称、性质。特别是粒度、温度，可有酸、碱等腐蚀性和特殊要求。指定具体的应用场合，规格宽度、长度、层数、厚度等，特别是耐热输送带使用的温度和体积。

　　The steel plate at the guide groove is designed far away from the conveyor belt, and the rubber skirt plate is longer, which makes the material rush out of the guide groove and pay attention to regular maintenance. When purchasing conveyor belts, it is necessary to accurately describe the specific material names and properties. Particularly the particle size and temperature, can have acid, alkali and other corrosiveness and special requirements. Specify specific application occasions, such as specification width, length, number of layers, thickness, etc., especially the temperature and volume of heat-resistant conveyor belt.

　　在运输和储存过程中，输送带的温度应保持在18-40℃之间，相对湿度应保持在50-80%之间。皮带应保持清洁，防止阳光直射或雨雪，防止与酸、碱、油等物质接触，并离加热装置一米远。

　　During transportation and storage, the temperature of conveyor belt should be kept between 18 - 40 C and the relative humidity should be kept between 50 - 80%. The Belt should be kept clean to prevent direct sunlight or rain and snow, to prevent contact with acid, alkali, oil and other substances, and one meter away from the heating device.

　　根据产品结构的不同，目前市场上输送带的类型可分为层状输送带、全芯输送带、钢丝绳芯输送带、钢丝绳芯输送带、钢管输送带、管状输送带、花纹输送带、挡泥板输送带等。

　　According to the different product structure, the types of conveyor belts on the market can be divided into layered conveyor belts, full core conveyor belts, steel core conveyor belts, steel core conveyor belts, steel pipe conveyor belts, tubular conveyor belts, pattern conveyor belts, fender conveyor belts and so on.

　　无论是哪一种输送带，都必须连接成环形才能使用，所以输送带连接器的质量直接影响到输送带的使用寿命以及输送带线路能否平稳运行。一般输送带接头常用的方法有机械接头、冷接头、热硫化接头。

　　No matter what kind of conveyor belt, it must be connected into a ring to use, so the quality of the conveyor belt connector directly affects the service life of the conveyor belt and whether the conveyor belt line can run smoothly. The common methods of conveyor belt joints are mechanical joints, cold joints and hot vulcanized joints.

　　其中，机械连接因其制造方便、操作快捷等优点得到了广泛的应用。整个核心输送带，尤其是PVC整体核心输送带，95%以上的地方与机械皮带扣连接。但是，不同的应用单元在机械扣的选择上有一定的差异，这使得输送带在使用时的损坏程度和更换频率也有很大的不同。

　　Among them, mechanical connection has been widely used because of its advantages of convenient manufacture and fast operation. The whole core conveyor belt, especially the PVC integral core conveyor belt, more than 95% of the places are connected with the mechanical belt buckle. However, different application units have some differences in the choice of mechanical buckles, which makes the damage degree and replacement frequency of conveyor belt vary greatly.

　　因此，选用性能优良的机械扣件，再加上较好的紧固工具和细致的操作，可以大限度地利用产品的性能，保证较长时间的连续工作。

　　Therefore, the selection of mechanical fasteners with excellent performance, together with better tightening tools and detailed operation, can maximize the use of product performance and ensure a longer period of continuous work.