Herringbone pattern

　　特征：带面上有高于带体的“人”字型花纹，花纹可是开口也可是封闭的，每一种花纹又可分为高、中、低三种。

　　Characteristic: There are "human" pattern on the belt surface which is higher than the belt body. But the opening of the pattern can also be closed. Each pattern can be divided into three types: high, medium and low.

　　用途：适用于≤40度倾角的粉状、颗粒状、小块物料输送、也可输送袋装物料。

　　Usage: Suitable for powder, granular and small pieces of material conveying with inclination less than 40 degrees, or for bagged materials conveying.

　　条状花纹

　　Stripe pattern

　　特征：带面上横有高出带体的条状花纹，花纹分为高、中、低三种，每种花纹按排列间距可分为疏、密等形式。

　　Features: There are strip patterns on the surface of the strip which are higher than the strip. The patterns are divided into three types: high, medium and low. Each pattern can be divided into sparse and dense patterns according to the arrangement distance.

　　用途：适用于≤30度倾角的水平输送包装物。若在成槽情况下，可代替人字型花纹。

　　Usage: Suitable for transporting packages with inclination less than 30 degrees. In the case of grooving, the herringbone pattern can be replaced.

　　粒状花纹

　　Granular pattern

　　特征：带面上有高出带体或凹嵌入带体的粒状花纹，也可将凹坑制成方孔形或棱形和布纹形。 用途：凸粒状花纹适用于软包装物或需有抓着力的物料输送（如纸板箱）或无滑动输送。

　　Characteristic: There are granular patterns on the surface of the belt which are higher than the belt body or concave embedded belt body. The pits can also be made into square hole or prism and cloth pattern. Usage: The convex grain pattern is suitable for conveying soft packages or materials requiring grabbing force (such as cardboard boxes) or non-sliding conveying.

　　凹坑形粒状花纹适用于≤45度倾角的粒状物输送。

　　The pit-shaped grain pattern is suitable for conveying granular materials with an inclination of less than 45 degrees.

　　扇形花纹

　　Fanlike pattern

　　特征：带面上有呈半扇形（或1/4圆型）花纹。当胶带成槽时花纹合扰成扇形（或半圆形）、属高花纹类。

　　Characteristic: There is a half fan (or 1/4 circle) pattern on the belt surface. When the tape is grooved, the pattern is fan-shaped (or semi-circular) and belongs to the high pattern category.

　　用途：适用于≤60度大倾角输送粉、颗粒及块状物料。

　　Usage: Suitable for conveying powder, granules and bulk materials at large inclination (< 60 degrees).

　　花纹输送带是由基带和花纹两部分组成，由于运送物料不同和输送倾角大小不同，要求花纹形状和高度也不同。

　　Patterned conveyor belt is composed of baseband and patterned parts. Because of different conveying materials and different conveying inclination, patterned shapes and heights are required.