The belt conveyor needs manual feeding or direct inflow during the working process It is the material entering the belt conveyor for lifting operation Sometimes when manual feeding is used, it will cause huge manpower, so purchasing is a good choice for the right feeder, and the use of feeder will also bring about a significant increase in production efficiency.

　　皮带输送机需要在工作期间进行均匀和定量的进给。 这样做的目的是确保斗式提升机的正常和使用，并提高机器的使用寿命和工作效率。 对于不同的材料和不同的提升功率，需要适当调整进料强度。 手动操作不能保证进料的均匀性和量化，因此必须使用配料机; 那么什么类型的喂料机器，结构特征是什么？ 根据材料测量的不同方法，一般进料器可分为进料器和质量进料器; 根据进料和配料操作的连续性，可分为连续进料器和间歇进料器。 根据主要结构形式，进料器具有盒式进料器，板式进料器，盘式进料器，带式进料器，电磁振动进料器和槽式进料器。 在选择时，我们应根据实际情况选择合适的进料器以匹配斗式提升机的工作。

　　The belt conveyor needs to be fed evenly and quantitatively during operation The purpose of this is to ensure the normal and safe use of bucket elevator, and improve the service life and work efficiency of the machine For different materials and different lifting power, the feed strength needs to be adjusted properly Manual operation can not guarantee the uniformity and quantification of the feed, so the batching machine must be used; then what type of feeding machine, and what are the structural characteristics According to different methods of material measurement, the general feeder can be divided into feeder and quality feeder; according to the continuity of feeding and batching operation, it can be divided into continuous feeder and intermittent feeder According to the main structure, the feeder has box feeder, plate feeder, disc feeder, belt feeder, electromagnetic vibration feeder and slot feeder In the selection, we should select the appropriate feeder according to the actual situation to match the work of the bucket elevator.

　　在皮带输送机的制造和研发过程中，通过不断改进，发明创造，学习国外技术，在市场上取得了良好的效果。 对于起重机，主要技术和部件是整个制造过程的。 在突破这些重要因素和技术难点后，我们可以创造出更的机械产品; 在煤炭，粮食和矿山生产中，由于材料大量，长工作时间和高工作效率限制了对提升机质量的要求。

　　In the process of manufacturing and R & D of belt conveyor, through continuous improvement, invention and creation, learning foreign technology, good results have been achieved in the international market For the crane, the main technology and components are the focus of the whole manufacturing process After breaking through these important factors and technical difficulties, we can create more perfect mechanical products; in coal, grain and mine production, due to a large number of materials, long working hours and high working efficiency limit the quality requirements of the elevator.