High temperature resistant conveyor belt will appear peeling phenomenon after using for a period of time, which seriously affects the normal use and production efficiency of high temperature resistant conveyor belt. This chapter analyzes the causes of peeling phenomenon and preventive measures for all conveyor manufacturers.

　　耐高温输送带剥落原因

　　Causes of peeling of high temperature resistant conveyor belt

　　1、芯糊塑化后经经纱卷粘脏，芯糊过塑不能很好地与面糊结合;

　　1. After the core paste is plasticized, it is dirty after warping, and the core paste can not be well combined with the batter if it is over plasticized;

　　2. 塑化剂在芯膏体中的沉淀降低了芯表面的附着力和强度。

　　2. The deposition of plasticizer in core paste reduces the adhesion and strength of core surface.

　　二、耐热输送带防剥落措施

　　II. Anti peeling measures for heat resistant conveyor belt

　　1. ，检查输送带是否与输送带设备相匹配或不匹配，这肯定会对输送带造成损坏。2. 输送带是否适合运输此类货物，是否适合在此类工作环境中工作。侧面是否会影响输送带的使用寿命。这些都是决定输送带正常运行的因素。还要检查输送带是否完好，问题是否得到妥善处理，以及输送带上的货物摆放是否合理，这将直接影响输送带的运行。

　　1. First, check whether the conveyor belt matches or does not match the conveyor belt equipment, which will definitely cause damage to the conveyor belt. 2. Whether the conveyor belt is suitable for transporting such goods and working in such working environment. Whether the side will affect the service life of the conveyor belt. These are the factors that determine the normal operation of the conveyor belt. It is also necessary to check whether the conveyor belt is in good condition, whether the problems are properly handled, and whether the goods on the conveyor belt are placed reasonably, which will directly affect the operation of the conveyor belt.

　　2. 要求操作人员具备输送设备操作和输送带维护的知识。一旦发现问题，应及时修复和处理，把危害扼杀在摇篮里。

　　2. Operators are required to have professional knowledge of conveyor equipment operation and conveyor belt maintenance. Once problems are found, they should be repaired and dealt with in time to strangle the hazards in the cradle.