工业皮带顾名思义就是运用在工业上的皮带，工业皮带有工业传动带、汽车传动带和输送带三大类。工业传动带和汽车传动带是属于传动带，用于传递机械动力的胶带主要有橡胶和增强材料（如棉帆布、人造丝、合成纤维或钢丝等）构成。与齿轮传动、链条传动相比，胶带传动具有机构简单、噪声小和设备成本低等优点，普遍用于各种的动力传动。机器上传动的环形带，套在两个皮带轮上，多用牛皮或线蕊橡胶制成，通称工业皮带。
Industrial belt, as the name suggests, is the belt used in industry. There are three types of industrial belt, automobile belt and conveyor belt. Industrial transmission belt and automobile transmission belt belong to transmission belt. Rubber and reinforced materials (such as cotton canvas, rayon, synthetic fiber or steel wire) are used to transmit mechanical power. Compared with gear transmission and chain transmission, belt transmission has the advantages of simple mechanism, low noise and low equipment cost, which is widely used in various power transmission. The ring-shaped belt on the transmission of the machine is sheathed on two pulleys. It is mostly made of cow hide or thread core rubber, which is commonly known as industrial belt.
工业皮带相关储存事项：
Storage of industrial belts:
1. 皮带和带轮应保持干净 不得沾有油和水。
1. The belt and pulley shall be kept clean and free from oil and water.
2. 皮带安装时，应检查传动系统，传动轴与传动轮是否垂直，传动轴之间是否平行，传动轮是否在一个平面上，如果不是，应当校正。
2. When installing the belt, check whether the transmission system, the transmission shaft and the transmission wheel are vertical, whether the transmission shafts are parallel, and whether the transmission wheel is in a plane. If not, correct it.
3. 请勿粘染油脂或其他化学品于皮带上。
3. Do not stick grease or other chemicals on the belt.
4. 工业皮带安装时工具或外力切勿直接施力于皮带上。
4. During the installation of industrial belt, tools or external forces should not be applied directly on the belt.
5. 皮带的使用温度范围为:-40°-120°C 。
5. The temperature range of the belt is - 40 ℃ °- one hundred and twenty ° C 。
6. 储存期间应避免使皮带承受过大的重量而变形，防止机械损伤，不得过于弯曲和挤压。
6. During storage, the belt shall not be deformed due to excessive weight, and mechanical damage shall be prevented. It shall not be too bent or squeezed.
7. 工业皮带在储存和运输期间，应避免阳光直射或是雨雪浸淋，保持清洁，防止与酸碱油类及有机溶剂等影响橡胶质量的物质接触。
7. During storage and transportation, the industrial belt shall be kept clean from direct sunlight or rain and snow, and shall not be in contact with acid, alkali, oil, organic solvent and other substances that affect the rubber quality.
8. 贮存时库房温度宜保持在-15~40摄氏度之间 相对湿度宜保持在50%~80%之间。
8. During storage, the warehouse temperature should be kept between - 15 ~ 40 ℃, and the relative humidity should be kept between 50% ~ 80%.
由于每个工业皮带的性能以及材料有所差别，因此在储存方式上，每种工业皮带还是有一些不同，但是万变不离其宗，希望对用户有一定帮助。
Because the performance and material of each brand of industrial belt are different, so in the storage mode, each kind of industrial belt still has some differences, but the change is inseparable from its origin. I hope it will be helpful to users.
The highlights of this article are shared by Shandong conveyor belt manufacturers. For more highlights, please click our website: https://www.huafengxiangsu.com , we will have more wonderful content waiting for you to check, welcome to inquire
联系微信