As we all know, conveyor belt after a long time of use, there will be such a small temper, which conveyor belt fracture this phenomenon is not uncommon. So, after the conveyor belt fracture, next, small make up to give you a simple analysis.

输送带热接，主要是指输送带通过加热热熔或者生胶片二次硫化把输送带接成环形的方法。这种接头方法比较理想，牢固度非常稳定，接头效率也比较高，其寿命也很长。但是其工艺比较繁琐，接头操作时间也相对比较长。

Conveyor belt hot joining mainly refers to the method of connecting the conveyor belt into a ring by heating, hot melting or secondary vulcanization of raw film. This kind of joint method is ideal, the firmness is very stable, the joint efficiency is relatively high, and its service life is also very long. However, the process is complicated and the joint operation time is relatively long.

输送带冷接，主要是指用胶水等粘合剂把输送带接成环形的方法。这种接头方法速度比较快，但是由于胶水等粘合剂的稳定性，加上工艺条件比较难掌握，其牢固度不稳定，相对使用寿命比热接差点。

Conveyor belt cold connection, mainly refers to the use of glue and other adhesives to connect the conveyor belt into a ring. This kind of joint method is fast, but because of the stability of glue and other adhesives, and the process conditions are difficult to grasp, its firmness is unstable, and its relative service life is worse than that of hot joint.

输送带接头，除了上述的热接和冷接之外，生活中比较常见的还有机械接驳。

Conveyor belt joint, in addition to the above hot and cold connection, there are more common mechanical connection in life.

输送带机械接驳，主要是指利用钢扣、铆钉、夹具等方式把输送带接成环形的方法。这种接头方法在时间上占了很大的优势，输送带也易于安装。但是这种接头方法会使输送带的平整度降低，也比较容易破损，更重要的是在使用的过程中，对于输送带的质量要求也是比较高的。因此，并不是所有设备都能适用输送带机械接驳的方式。

Conveyor belt mechanical connection, mainly refers to the use of steel buckle, rivets, fixtures and other ways to connect the conveyor belt into a ring. This joint method has a great advantage in time, and the conveyor belt is easy to install. But this joint method will reduce the flatness of the conveyor belt, and it is easy to be damaged. More importantly, in the process of use, the quality requirements for the conveyor belt are relatively high. Therefore, not all equipment can be applied to the mechanical connection of conveyor belt.

经过上述小编的简单分析，相信大家对于输送带接头是否一定要用热接，有了一定的了解了吧。在输送带接头方法上的选择，我们要考虑输送带的使用环境，设备的要求，还有在使用过程中的便捷程度等等，结合综合因素来选择合适的输送带接头方法。

After the simple analysis of the above small series, I believe you have a certain understanding of whether the conveyor belt joint must be hot connected. In the selection of conveyor belt joint method, we should consider the use environment of the conveyor belt, the requirements of the equipment, and the convenience in the process of use, and so on, combined with comprehensive factors to select the appropriate conveyor belt joint method.