In the era of fast-paced life, many production enterprises operate on assembly lines. At this time, conveyor belts come in handy. Conveyor belts are deeply loved by enterprise users because of their large conveying capacity, light weight, strong conveying capacity, simple structure and easy maintenance. However, the conveyor belt runs at high speed every day, which will inevitably lead to some faults, such as the problem of side ditch.

那么，输送带出现边沟问题怎么解决?下面我们来跟着输送带厂家一起了解一下吧。

So, how to solve the problem of side ditch on the conveyor belt? Now let's follow the conveyor belt manufacturer to learn about it.

当输送带出现边沟的问题时，我们应该从根本上找原因，出现这种问题的原因主要有两个，一是配方;二是工艺。

When the conveyor belt has the problem of side ditch, we should find the root cause. There are two main reasons for this problem: one is the formula; Second, technology.

先说配方：是指边胶的配方，其流动性欠佳，与贴胶及盖胶不能达到共硫化;再说工艺;是指输送带带坯成型工艺，带坯侧面不整齐，上边胶工艺没有按要求做，边胶与带坯之间有空隙，导致出现如上问题。

First, formula: it refers to the formula of edge glue, which has poor fluidity and can not achieve co vulcanization with adhesive paste and cover glue; Second, technology; It refers to the forming process of the belt blank of the conveyor belt. The side of the belt blank is not neat, the upper edge glue process is not done as required, and there is a gap between the edge glue and the belt blank, resulting in the above problems.

然后是硫化工艺：如果以上两方面没有问题，在硫化过程中，成槽宽度及压缩比掌握(熟知并能运用) 不适宜也会出现边部边沟及边胶脱空的现象。

Then comes the vulcanization process: if there are no problems in the above two aspects, during the vulcanization process, the groove width and compression ratio are not suitable (well-known and can be used), and the phenomenon of edge ditch and edge glue void will also occur.

输送带出现边沟问题主要是关于边胶的问题。

The side ditch problem of conveyor belt is mainly about the side glue.

1.边胶没有上好再加上压缩比过小,缺料造成。

1. The edge glue is not well applied and the compression ratio is too small, resulting in material shortage.

2.边胶没有上好后造成硅油渗入形成分离界面。遇到输送带出现边沟故障时，不要慌，检查原因。平时也要注意定期检修，做到早发现，早维修，减少出现故障的几率，降低设备大修的次数，提高生产效率。

2. After the edge glue is not properly applied, silicone oil infiltrates to form a separation interface. In case of side ditch failure of conveyor belt, don't panic and check the cause. At ordinary times, we should also pay attention to regular maintenance, so as to find and repair early, reduce the probability of failure, reduce the number of equipment overhaul and improve production efficiency.

以上山东输送带的介绍就到这里了，希望能够对你的了解有所帮助。

That's all for the introduction of Shandong conveyor belt. I hope it can be helpful to your understanding.