输送带使用时间久了其实会出现不少的问题，就需要看程度来进行更换，更换的主要原因是磨损，那么输送带在运行中存在的磨损形式有几种？一般分为以下3种。

　　If the conveyor belt is used for a long time, there will be a lot of problems. It needs to be replaced according to the degree. The main reason for replacement is wear, so how many forms of wear exist in the conveyor belt in operation? Generally divided into the following three.

　　输送带硫化接头处磨损通常是由于输送带自身材料要比硫化接头处胶层的耐磨度高或热硫化质量问题，造成硫化接头胶层局部磨损，露出钢丝芯或尼龙芯，对输送带之间的硫化接头强度构成严重威胁。

　　The wear of the conveyor belt vulcanized joint is usually due to the high wear resistance of the conveyor belt's own material than the rubber layer of the vulcanized joint or the quality problem of hot vulcanization, resulting in local wear of the rubber layer of the vulcanized joint, exposing the steel wire core or nylon core, posing a serious threat to the strength of the vulcanized joint between the conveyor belt.

　　输送带在裙板部位磨损，由于输送带导料装置的裙板调整不当或者导料裙板设计不良，会导致裙板在运行中磨损输送带，造成输送带两侧上胶层磨损严重，整条胶带纵向运行方向露出钢绳芯或尼龙芯，一旦聚酯翘起，极易缠绕到托辊上，造成钢丝带脱丝或胶带的撕裂。

　　Conveyor belt parts wear the skirt board, because of improper adjustment apron conveyor belt feed device or feed apron poorly designed, can lead to wear in the operation of the apron in conveyor belt, causing a rubber conveyor belt on both sides of the serious wear and tear, and the whole belt longitudinal direction with steel rope or the godson, once the cock of polyester, winding on the roller extremely easily, cause steel wire or tape torn off.

　　山东输送带中间部位磨损这是由落料冲击造成的，由于漏斗的落料点相对固定，因此输送带承受冲击的部位磨损加剧，造成输送带沿运行方向局部磨损严重，也会导致露出的钢绳芯脱丝或输送带撕裂。

　　Shandong conveyor belt wear in the middle part of this is caused by the impact of falling material, due to the hopper falling point is relatively fixed, so the impact of the conveyor belt wear, causing serious local wear along the direction of the conveyor belt, will also lead to exposed steel rope core off wire or conveyor belt tear.

　　对于尼龙橡胶带则造成中间部位强度下降，由于承载托辊存在3。～4。的前倾角，所以在承载托辊趋中力的作用下，胶带运行中会出现“叠带”的危险现象。

　　For nylon rubber belt, the strength of the middle part decreases, because the bearing roller exists 3. ~ 4. So under the action of the centralizing force of the bearing roller, there will be a dangerous phenomenon of “overlapping belt” in the operation of the belt.

　　所以在选择输送带的时候我们就要注意到它的材质以及后期的施工工艺，从而能够更好的保证我们所选购的产品在耐用性上是具有更多的优势的。更多内容了解就来网站www.huafengxiangsu.com吧。

　　So when choosing the conveyor belt, we should pay attention to its material and later construction technology, so as to better ensure that the products we choose and buy have more advantages in durability. For more information, visit www.huafengxiangsu.com.