What is the purpose of waste conveyor belt

废旧输送带通常可用于多种目的：

Waste conveyor belts can usually be used for a variety of purposes:

一.制作圆柱形遮阳板。由于场地的限制，电焊工作经常在露天进行。在炎热的夏季，考虑到氧气、乙炔暴露在阳光下会引起爆炸等不因素，修理厂根据乙炔、氧气搬运车的外形尺寸，用废输送带给搬运车戴上“大帽子”。该防晒装置有效避免了氧气瓶、乙炔瓶在高温天气下的直接暴露，了隐患。

I Make cylindrical sun visor. Due to the limitation of the site, electric welding is often carried out in the open air. In the hot summer, considering the unsafe factors such as explosion caused by exposure of oxygen and acetylene to the sun, the repair shop uses waste conveyor to bring the acetylene and oxygen carrier to wear a "big hat" according to the overall dimensions of the carrier. The sunscreen device effectively avoids the direct exposure of oxygen cylinders and acetylene cylinders in high temperature weather and eliminates potential safety hazards.

二：做成车辆挡泥皮。为减少行车期间路上砂石、泥水等物质对车辆大箱底、车轮旁边配件、零件的损害，昌龙公司相关技术人员经过试验、测量、比较，采用废旧输送带替代钢板制作车辆挡泥板，不仅节约了钢板费用、保护了车辆配件、有效延长车辆大厢及油箱等配件的使用寿命，同时车辆一经安装，使用终身，大大减少了相关维修费用。

2： Make a vehicle mud flap. In order to reduce the damage of sand, gravel, muddy water and other substances on the bottom of the vehicle trunk and the accessories and parts next to the wheels during driving, the relevant technicians of Changlong company have used waste conveyor belts to replace steel plates to make vehicle fenders through test, measurement and comparison, which not only saves the cost of steel plates, protects vehicle accessories and effectively prolongs the service life of vehicle trunk, fuel tank and other accessories, At the same time, once the vehicle is installed, it will be used for life, which greatly reduces the relevant maintenance costs.

三：做成车辆防抛洒槽。因物料在撒落过程中遇到钢板防抛洒槽有回弹，存在无法对物料进行防抛洒的缺陷，通过对物料抛洒方向、钢板式防抛洒槽缺陷分析，在已经安装钢板式防抛洒装置的车辆上用废旧输送带衔接原有防抛洒装置与车厢边缘，在新车上直接安装废旧输送带制作的防抛洒装置。此装置，能有效避免物料回弹抛洒等现象，提升了防抛洒能力。

3： Make a vehicle anti throwing trough. Due to the rebound of the steel plate anti throwing groove in the process of scattering, there is a defect that the material can not be prevented from scattering in an all-round way. Through the analysis of the material throwing direction and the defects of the steel plate anti throwing groove, the waste conveyor belt is used to connect the original anti throwing device with the edge of the carriage on the vehicle with the steel plate anti throwing device, The anti throwing device made of waste conveyor belt is directly installed on the new car. This device can effectively avoid the phenomenon of material rebound and throwing, and comprehensively improve the anti throwing ability.

四：做成建筑废渣。用切碎机给这些废旧的输送带切碎。用来铺路基。很多公路修筑都会用到。

4： Make it into construction waste. Use a chopper to chop these waste conveyor belts. Used to pave the subgrade. Many roads are built.

五：回收再利用：把能重新放进炉子里，再次融化，做成新的输送带材质。

5： Recycling: put the energy back into the furnace and melt it again to make a new conveyor belt material.